Dimplex vs Milwaukee vs Ryobi: The Real Cost Comparison for Small Business Climate Equipment

Why I stopped treating "climate equipment" as one category

I manage procurement for a 40-person facilities maintenance firm. We've been tracking every climate-related invoice in our system since 2019, and one pattern refuses to go away: the budget overruns almost never come from a specific brand. They come from buying the wrong category.

Most buyers focus on price-per-unit and completely miss the operating cost, the category mismatch, and the maintenance bill that shows up six months later. So this is how I actually compare equipment now: upfront price, cost-per-hour of operation, and cost-of-getting-it-wrong. I ran that same framework against three names that keep coming up in quotes — Dimplex, Milwaukee, and Ryobi — and included one maintenance line item that belongs in the same conversation but usually doesn't.

"The question everyone asks is: what's the cheapest heater? The question they should ask is: which of these four jobs am I actually paying for?"

Comparison 1: Dimplex electric fan heater vs Milwaukee fan vs Ryobi fan

These three get lumped together in procurement conversations, and that's the blind spot. Milwaukee and Ryobi fans move air. They cool and ventilate. A Dimplex electric fan heater heats air. That's not a marketing distinction — it's the difference between two completely different line items in your facility budget.

Upfront cost (q1 2025 reference pricing)

  • Dimplex electric fan heater (2000W class): roughly $60–$120 per unit at major retailers (based on public retail quotes, January 2025; verify current pricing with your distributor).
  • Milwaukee jobsite fan (18V or corded): roughly $80–$150 per unit.
  • Ryobi jobsite fan (18V): roughly $50–$110 per unit.

On the sticker, the gap is modest. On the run-rate, it isn't.

Operating cost per hour

Run a 2000W fan heater at full output, and you're consuming ~2 kWh per hour. At $0.12/kWh (U.S. commercial average, EIA reference, 2024), that's about $0.24 per hour. A Milwaukee or Ryobi jobsite fan draws 40–120W, which works out to roughly $0.005–$0.015 per hour. That's a 16–40x spread in run-rate.

So when someone tells me "the Ryobi fan costs half as much as the Dimplex heater," I get why they think that. But if the actual job is heating, the Ryobi fan isn't a cheaper version of the Dimplex heater — it's the wrong product. It won't heat. It'll just make cold air move.

I've made this mistake in both directions. In 2023, I bought six Milwaukee fans for a client site that needed to control winter dampness in a poorly ventilated storeroom. The fans didn't fix it — they made it slightly worse by circulating moist air against cold concrete. We ended up buying four Dimplex fan heaters to stabilize temperature and a dehumidifier to pull moisture out. Combined overspend on that job: $840 over the original plan. That's 17% of that site's quarterly consumables budget. Not because the fans were bad products. Because I matched them to the wrong job.

Comparison 1 verdict

If the requirement is heat, the Dimplex electric fan heater is the correct category and the run-rate math is secondary to that. If the requirement is cooling or ventilation, Milwaukee and Ryobi fans are correct, and the Dimplex heater is the wrong spend. Buying both categories is often cheaper than buying the wrong one and re-buying later. That's the whole comparison in one line.

Comparison 2: Dimplex EverDri 20E 20L dehumidifier vs the alternatives

The second common mistake is treating humidity as a heating problem. Run a heater in a damp space and you'll notice how the walls feel warmer for a few hours. What you won't notice is that the moisture is still there, now being pushed against the coldest surfaces in the room.

The Dimplex EverDri 20E 20L is the specific model that keeps showing up in quotes for us. Here's how it stacks against the alternatives I've actually evaluated.

Option A: Dimplex EverDri 20E 20L

~20 liters/day extraction, adjustable humidistat, and a tank you can either empty manually or plumb to a drain. Typical street price in early 2025 sits around $220–$300 (based on public retail quotes, January 2025; verify current pricing). Rated draw is roughly 400W, so continuous operation runs about $0.05/hour at $0.12/kWh.

I'm not 100% sure about the exact extraction curve at low temperatures, but from our own readings it performs adequately in the 60–75°F range, which is where most of our sites sit.

Option B: heat + ventilation

Looks free. Isn't. Heating a 200 sq ft damp space during the winter pulls the whole conditioned envelope up and then pushes that warm air out the vent. You pay twice — once to heat it, once more when you have to heat it again.

Option C: chemical desiccant

Works for closets and tool chests. Doesn't work for a real room. Cheap per unit, expensive per solved problem.

Comparison 2 verdict

The Dimplex EverDri 20E 20L wins the comparison only if you've quantified what the dampness is costing you. If a mold issue on stored inventory is running you $500+ per incident, the EverDri pays itself back in weeks. If it's occasional condensation on a window, you don't need it — and I've seen plenty of small businesses buy a dehumidifier to solve a problem that was actually a leaking pipe tank.

Comparison 3: upstream maintenance — draining the water heater vs downstream dehumidification

Here's the comparison that surprised me, and it's the one most buyers skip entirely: the upstream maintenance cost dwarfs most downstream purchases.

People assume that dampness in a facility requires a dehumidifier. More often, the dampness is coming from equipment that hasn't been maintained — a leaking tank, a stuck temperature-pressure relief valve, or a slow drip from sediment buildup. Sediment (mostly calcium and magnesium from hard water) collects in the bottom of the tank over years, reduces efficiency, and shortens tank life.

How to drain a hot water heater (the actual procedure)

  1. Shut off the power (breaker) or gas supply and close the cold-water inlet valve.
  2. Connect a garden hose to the drain valve and route it to a floor drain or outside.
  3. Open a hot-water tap at the highest fixture to prevent a vacuum lock.
  4. Open the drain valve and let the tank empty.
  5. Briefly reopen the cold inlet to flush remaining sediment — repeat until water runs clear.
  6. Close the drain valve, close the hot tap, reopen the cold inlet, refill the tank fully, then restore power or gas.

Why this belongs in the same article: flushing a hot water heater costs essentially nothing — a hose, an hour of labor. Replacing a failed 50-gallon gas water heater runs roughly $1,200–$2,500 installed in the U.S. (based on public contractor quote ranges, January 2025; verify current pricing locally). The causation runs the way most buyers don't expect: the expense isn't the maintenance, it's the failure the maintenance prevents — and the secondary water damage that failure causes, which is where the dehumidifier purchase ends up on the books.

Comparison 3 verdict

Before you buy a single dehumidifier, walk the building and check the water heater. An annual flush is the cheapest line item in this entire comparison. It's also the only one that reduces the cost of the other three.

What to actually buy, by scenario

  • You need heat in a small workspace: Dimplex electric fan heater, matched to the room's actual wattage need — not the one on sale. Budget the $0.24/hour run-rate into the operational cost, not just the purchase price.
  • You need air movement or cooling: Milwaukee or Ryobi fans, depending on whether you're already in one of their battery ecosystems. Do not buy a heater for this job.
  • You have humidity that won't clear with ventilation: find the source first. If the source is solved and dampness persists, the Dimplex EverDri 20E 20L is the right tool and its cost is defensible against the loss it prevents.
  • You're doing annual maintenance: drain the hot water heater. This is the highest-return hour in the facility budget, and it's the one most small businesses skip because nobody sends them a bill for not doing it.

One more thing, and this one is personal. When our firm was two people, we bought equipment in single units and got treated like we were supposed to apologize for it. The vendors who took our $200 order seriously are the same ones we now place $20,000 orders with — and Dimplex's line has stayed on our approved list ever since. Small doesn't mean unimportant. It means potential. Price it accordingly, and check the run-rate before the sticker.

Share:
author-avatar
Kenji Aoki

Kenji Aoki writes about air-cooled and water-cooled condensers, evaporators, finned coils, unit coolers, and flooded or direct-expansion heat-transfer assemblies. He evaluates equipment against ISO 5149 design considerations using temperature difference, UA value, refrigerant subcooling and superheat, airflow, frost behavior, condensate drainage, and pressure drop. His guidance supports refrigeration engineers and equipment purchasers in matching coil geometry, materials, fan control, defrost method, and circuit design to operating temperatures and maintenance conditions.

Leave a Reply

Your email address will not be published. Required fields are marked *